You can access the I/Os setting in the Control Panel to add and manage the terminals, signals, and labels for the input and output ports of the products and the start and end terminals of the wires.

To access the I/Os setting, click the following icon.

This will open the following form.

You can add as many new inputs and outputs (I/Os) as you would like to. I/Os are categorized into three types: Terminal, Signal, and Label.

To add a new I/O:

1/ Select the I/O Type.

2/ Click New.

3/ Add a name for the I/O.

4/ Click Save.

In the form, you can add, edit, and delete entries in the signal, terminal, and label lists.

You can change the case of one or multiple I/Os of the same type at a time.

Select the I/O Type, select the I/Os by holding down Shift (to select a series) or Ctrl (to select outside of a series,) and choose the Case option: Upper, Lower, Title, or Sentence.

The terminals, signals, and labels can be used to define the inputs and outputs for equipment and the start and end terminals for wires in the I/O Studio.